SHD-Type double bolt clamp with wing nut
Norms
- DIN 32676-A for Tube DIN 11866-A (DIN 11850)
- DIN 32676-B for Tube DIN 11866-B (ISO 1127)
- DIN 32676-C for Tube DIN 11866-C (ASME BPE-BS 4825)
Application
- Pharma & Biotech
- Food and Dairy
- Chemical
Material
Clamp made of SS 316 / 1.4401
(C22 possible on request)
Surface quality
bright finish
Execusion
- V-Profile for equal pressure distribution
- double screw system
- middle to high pressure load
Sterilisation temperature
150°C
Options
Wing- or hex nut
Note
* Maximal working pressure has been determined
independently from the relating gasket (Elastomere)
Pressure test reports
- 5.5 SH-Type_DN125-Pressure-Test-Report
- 6.0 SH-Type-Pressure-Test-Report
- 6.625_DN250 SH-Type-Pressure-Test-Report
- 8.0 SH-Type-Pressure-Test-Report
- 8.625_DN200 SH-Type-Pressure-Test-Report
- 10.0_DN250 SH-Type-Pressure-Test-Report
- 10.625-SH-Type-Pressure-Test-Report
- 12.0_DN300 SH-Type-Pressure-Test-Report
- 12.625 SH-Type-Pressure-Test-Report
Torque guide
SHD-Type double bolt clamp with wing nut
| ISO 1127 | DIN 11850 | ASME BPE / BS 4825 |
A Dim. TC (mm) |
B (mm) |
L (mm) |
R (mm) |
* Max. Work pressure @ 150°C (bar) |
Max. Test pressure (bar) |
Article Nr |
|---|---|---|---|---|---|---|---|---|---|
| DN 125 | DN 125 | 5 1/2" | 155.0 | 24.0 | 265.0 | 148.0 | 30 | 60 | 101.155.SHD |
| - | - | 6" | 167.0 | 24.0 | 277.0 | 152.0 | 30 | 60 | 101.167.SHD |
| DN 150 | DN 150 | 6 5/8" | 183.0 | 24.0 | 297.0 | 164.0 | 25 | 50 | 101.183.SHD |
| - | - | 8" | 217.0 | 24.0 | 332.0 | 184.0 | 20 | 40 | 101.217.SHD |
| DN 200 | DN 200 | 8 5/8" | 233.5 | 24.0 | 333.0 | 185.0 | 20 | 40 | 101.233.SHD |
| - | DN 250 | 10" | 268.0 | 24.0 | 382.0 | 205.0 | 16 | 32 | 101.268.SHD |
| DN 250 | - | 10 5/8" | 286.0 | 24.0 | 405.0 | 213.0 | 16 | 32 | 101.286.SHD |
| - | DN 300 | 12" | 319.0 | 24.0 | 458.0 | 242.0 | 10 | 20 | 101.319.SHD |
| DN 300 | - | 12 5/8" | 338.5 | 24.0 | 463.0 | 243.0 | 10 | 20 | 101.338.SHD |