Product description
The Mark V-100 ball valve bodies have excellent pressure and flow control for gasses, various liquids and fibrous slurries.The Mark V-100 ball valve design utilizes a standard ball with a triangular shape wedge formed in it. This device allows for both throttling control and on/off service used in conjunction with a variety of actuators.
Control valve MK V100
Size
- 2" - 12"
Body Material
- LCC, WCB,CF8M (SST), additional materials may be available upon request.
End Connections
- ASME 150, 300, & 600 lbs, manufactured to ASME B16.34-latest edition
Seat Materials
- Metal, TCM
Trim Material
- Ball- CG3M/ Chrome Plated
Shutoff
- Metal Ball Seal: 0.001% of valve capacity at full travel: 1/10 of Class IV per ASME/FCI 70-2
- TCM Ball Seal: 2 ml of air/min/inch of nominal valve size at 50 psi differential (3.4 bar, differential)
- Flow Ring: 2% of valve capacity at full trave
Max. Inlet Pressures/Temperatures
- Consistent with ASME Class 150, 300 and 600 lb pressure/temperature ratings as per ASME B16.34 Refer to the following table and do not exceed the pressure. Refer to “Installation” in the I & M.
Max Pressure Drop
- Not to exceed pressure drop and temperature conditions specified at the time of ordering
Flow Characteristics
- Modified Equal Percentage
Flow Direction
- Normal (forward) flow is into the convex side of the V-ball
- Bi-directional flow is into either side of the V-Ball; TCM ball seal, metal ball seal, or flow ring
Features and Benefits
- Can be used for both throttling and on-off applications
- Flangeless body design fits between raised face flanges
- High flows
- Modified equal percentage flow characteristic V-ball closes against the ball seal with a shearing action as the ball rotates
- Used where there are low pressure drops and can be used in slurry applications
- Tight shutoff
Documents
